Serving Grays and nearby areas
    07899 728506
    Adrian Plumbing & Heating
    Boiler ServicingUpdated 16 November 20265 min read

    What does a boiler service actually check, and what should I have ready?

    Published by Adrian Plumbing & Heating

    In short

    A boiler service is a safety and performance check carried out by a Gas Safe registered engineer. It covers the controls and safety devices, the flue, the main components and a gas and pressure check, and the engineer records the results. It usually takes less than an hour. Have your boiler type, paperwork and a working carbon monoxide alarm ready.

    What a boiler service checks

    The exact list depends on the boiler, but HomeServe's service checklist describes a typical visit like this:

    Swipe or scroll to compare →
    AreaWhat the engineer looks at
    Visual inspectionSigns of damage or distress, with parts cleaned and adjusted where needed
    Controls and safety devicesThat the controls work and the safety devices respond as they should
    FlueIts route and outlet, for obstructions, and that it is safely fitted
    Main componentsThe burner, heat exchanger, flueways and ignition pins are removed, inspected and cleaned
    Other testsFlame sensing, high-limit thermostat, ventilation, heating controls, electrical connections, seals, and gas and pressure flow
    Condensate drainageFor condensing boilers, the drainage system
    Records and final checkTest results are logged and settings are put back as the customer had them

    Which? adds that a service should include checking the system pressure, looking for corrosion, cleaning dirty components, and checking for gas or carbon monoxide leaks and other safety concerns.

    Most of this happens inside the boiler casing, which is why it is work for a Gas Safe registered engineer and not something to try yourself.

    What to have ready for the engineer

    A little preparation makes the visit smoother:

    1. Your boiler type. Know whether it is a combi, system or heat-only boiler. Which? says this affects the advice an engineer gives, including on flow temperature.
    2. Your paperwork. Find the manual, the last service record and any warranty terms. Which? notes that missed annual services can affect a manufacturer's warranty, so check the conditions that apply to you.
    3. Clear access. Move anything stored in front of the boiler and make sure the engineer can reach it.
    4. A working carbon monoxide alarm. Which? lists this among the things to have ready if you have a gas boiler. Test it before the visit.
    5. A note of any problems. Write down odd noises, error codes, cold radiators or pressure that keeps dropping, and when you noticed them. If the boiler has dropped pressure recently, our guide on why boiler pressure keeps dropping covers the safe checks.

    Questions worth asking

    You don't need technical knowledge to get value from a service. Which? suggests asking:

    • What does each part of the checklist involve, and why does it matter?
    • Is there anything that could make the boiler more efficient?
    • What flow temperature suits my home? (For heat-only or system boilers, Which? advises against lowering it because of Legionella risk, so ask before changing anything.)
    • If repairs are needed, what will they involve and what will they cost?

    You can also ask to see the engineer's Gas Safe ID card, or check their registration online or on 0800 408 5500.

    Why the records matter

    The engineer logs the test results, and HomeServe notes this includes figures such as boiler pressure or heat input. Keep the record with your boiler paperwork. Next year's engineer can compare it with what they find, and it shows your boiler has been looked after if a warranty or a landlord or insurance question ever comes up. If you are not given a record, ask for one.

    What a service does not do

    A service checks and cleans the boiler. It is not a repair, and it doesn't guarantee the boiler will never break down. If the engineer finds a fault or a worn part, they should explain it and agree next steps with you before doing anything else.

    A service also doesn't replace a carbon monoxide alarm. Keep the alarm fitted and tested all year.

    If you're comparing visits, our guide on how a boiler service quote works explains what to look for, and the best time of year to service a boiler covers timing.

    Booking a service near Grays

    We are a family-run, Gas Safe registered business (registration number 563742) with over 20 years' experience, and we cover Grays, Upminster, Hornchurch, Basildon, Barking and Dagenham, Ilford, Dartford and surrounding areas. Adrian is a manufacturer-accredited installer for Baxi and Vaillant, and the business is rated 5.0 on Google.

    For a free quote, Adrian will talk through the job with you, then agree a visit or quotation. You can find our other services on the services page.

    Gas safety: If you smell gas or suspect carbon monoxide, do not operate any switches, lights or flames. Leave the property, get to fresh air, and call the National Gas Emergency Service on 0800 111 999 from outside the building. If someone feels unwell, seek medical help or call 999.

    Call Adrian on 07899 728506 or request a callback at adrianplumbingandheating.co.uk

    Disclaimer: This article provides general guidance only. Always follow your appliance manufacturer's instructions and use an appropriately qualified professional for gas, electrical and plumbing work. Gas work must be carried out by a Gas Safe registered engineer.

    Frequently asked questions

    How long does a boiler service take?

    HomeServe says a service usually takes less than an hour, depending on the appliance.

    Do I need to be at home during a boiler service?

    Someone should be there to let the engineer in and talk through any findings. Agree the arrangements when you book.

    What should I do before the engineer arrives?

    Clear access to the boiler, find the manual and last service record, test your carbon monoxide alarm and note any problems you have noticed.

    Can I check the engineer is Gas Safe registered?

    Yes. Ask to see their ID card, check online or call the Gas Safe Register on 0800 408 5500.

    Will a service stop my boiler breaking down?

    No. A service checks and cleans the boiler and logs the results, but it cannot guarantee that no fault will develop.

    Useful sources

    Need advice about your home?

    Adrian can talk through the issue and arrange a visit if needed.

    We use necessary cookies to keep the site working and optional analytics to understand what is useful. See our Cookie Policy.

    Call nowRequest callback
    Sarah
    Hi there! Have a question? Chat with us here.